<dd id="jm78x"><center id="jm78x"><video id="jm78x"></video></center></dd>
<em id="jm78x"><acronym id="jm78x"><input id="jm78x"></input></acronym></em>
    1. <li id="jm78x"><acronym id="jm78x"></acronym></li>
      <th id="jm78x"></th>

        歡迎光臨濟南九創門業有限公司官網!

        聯系我們 收藏本站 在線留言

        新聞資訊

        首頁>>新聞資訊>>車庫門怎么調行程?
        新聞資訊
        聯系我們
        濟南九創門業有限公司

        聯系人:李經理

        電話:15006519345

        網址:www.halc9bit.com

        地址:濟南市天橋區北園大街372號大明家居3F-A-10

        車庫門怎么調行程?

        來源:http://www.jnhsjlm.com 日期:2022-02-26 發布人:guanli
        大家雖然對車庫門的了解比較多了,但是不知道怎么給車庫門調行程,小編專門去做了筆記,整理了以下四大條:
        Although we know more about the garage door, we don't know how to adjust the schedule for the garage door. Xiaobian specially took notes and sorted out the following four items:
        1、按下車庫門控制板上的FUNC鍵,此刻RUN燈開端閃亮,按住此鍵超越8秒,RUN燈變為常亮,此刻進入開關門行程和過載力學習進程。
        1. Press the func key on the garage door control panel. At this moment, the run light starts to flash. Press and hold this key for more than 8 seconds, and the run light becomes normally on. At this moment, enter the opening and closing stroke and overload force learning process.
        2、按INC鍵,電機開端向開門的方向運轉,按住不放,電機運轉速度由慢轉快,一起RUN指示燈閃亮,電機向上運轉,抵達理想的方位后松開按鍵,電機停止運轉;假如按下DEC鍵,則電機由慢轉快向關門方向運轉,STA燈閃亮,用這兩個按鍵可調節上到位的方位。
        2. Press the Inc key, and the motor starts to run in the direction of opening the door. Press and hold it. The motor runs from slow to fast. Together, the run indicator flashes. The motor runs upward. When it reaches the ideal position, release the key and the motor stops running; If the DEC key is pressed, the motor will turn from slow to fast to close the door, and the sta light will flash. Use these two keys to adjust the position in place.
        3、上到位的方位調整合適后,按FUNC鍵一次,則RUN指示燈快速閃爍后平息,標明上到位學習完結;一起STA指示燈點亮,程序進入下到位學習進程。
        3. After the orientation of the upper position is adjusted properly, press the func key once, then the run indicator flashes quickly and subsides, indicating that the upper position learning is completed; The sta indicator lights up together, and the program enters the learning process in place.
        4、用INC和DEC兩個按鍵調整下到位方位,在抵達預訂方位后,按FUNC鍵一次,此刻STA燈閃亮,標明下到位學習完結。
        4. Use the Inc and dec keys to adjust the down position. After arriving at the reserved position, press the func key once. At this moment, the sta light flashes to indicate that the down position learning is complete.
        以上就是車庫門的調行程的方法,不知道您學會了沒有,車庫門是人們日常生活中應用十分遍及的一種門,功能方面也是十分的先進。
        The above is the method of adjusting the travel of the garage door. I don't know if you have learned it. The garage door is widely used in people's daily life, and its function is also very advanced.

        推薦閱讀/ Recommended reading

        大家雖然對車庫門的了解比較多了,但是不知道怎么給車庫門調行程,小編專門去做了筆記,整理了以下四大條: Although we know more abo

        車庫門的五種常見故障及其排除方法 2022-02-24
        車庫門維修后如何進行日常維護? 2022-02-18
        日常清洗卷簾門的方法有哪些? 2022-02-18
        快速卷簾門安裝后更加牢固的方法有哪些 2022-02-17

        【本站圖片均由網站所有方提供,部分圖片來源于網絡,如無意中侵犯了某媒體或個人的知識產權,請來信或來電告之,本網站將立即刪除?!?/p>

        • 濟南九創門業有限公司
        乌克兰裸体美女AAAAAA片,久久精品人妻一区二区三区,女班长裸体扒开两腿让我桶动态图,欧美性爱A片